GATE AUTOMATION ACCESSORIES

The LED Flashing light will briefly illuminate your yard at night when the gate opens / closes.

Available in 24 V and 220 V.

The LED Flashing light will briefly illuminate your yard at night when the gate opens / closes.

Available in 24 V and 220 V.

The purpose of the antenna is to increase the operating distance of the remote control.

The purpose of the antenna is to increase the operating distance of the remote control.

The AF43S receiver is mounted on the control board.

Thanks to the receiver, automation drives are controlled by remote controls. Only suitable for CAME remote controls.

Receiver Came RE432

The receiver is used when you want to combine the operation of several different automatics on one remote control. The housing of the receiver complies with protection class IP54. Designed to work with TOP / TAM remote controls with a frequency of 433.92 MHz.

 

The AF43S receiver is mounted on the control board.

Thanks to the receiver, automation drives are controlled by remote controls. Only suitable for CAME remote controls.

Receiver Came RE432

The receiver is used when you want to combine the operation of several different automatics on one remote control. The housing of the receiver complies with protection class IP54. Designed to work with TOP / TAM remote controls with a frequency of 433.92 MHz.

 

The photocells are designed to protect you and your car from being crushed. The principle of their operation consists in preventing the gate (or road barrier) from closing until an obstacle is detected.

There are several types of photocells for your convenience:

• Wired photocells;
• Reflective photocells (where it is not possible to route wires).

The photocells are designed to protect you and your car from being crushed. The principle of their operation consists in preventing the gate (or road barrier) from closing until an obstacle is detected.

There are several types of photocells for your convenience:

• Wired photocells;
• Reflective photocells (where it is not possible to route wires).

In the event of a power failure, the garage door and the yard gates with automation can be opened using the emergency door opening.

In the event of a power failure, the garage door and the yard gates with automation can be opened using the emergency door opening.